What are flat rooflights?
Flat rooflights in Renfrewshire and Inverclyde means fixed double or triple glazed rooflights for flat roofs and extensions. Every quote follows a survey of the roof and the room below.
Stone villas, cottages and conservation areas across Scotland often call for conservation rooflights in slate roofs. Short winter days in Scotland make every square metre of overhead glass count, so rooflight sizing matters.
Towns in Renfrewshire and Inverclyde
Specification options in Renfrewshire and Inverclyde
- Integral or fitted blinds
- Insulated kerb or timber upstand built to suit
- Double or triple glazing
- Rain sensor if paired with an opening unit
- Plastered or lined internal reveal
- Slim sightlines from inside — mostly glass, little frame
- Double or triple glazed with a warm-edge spacer
Planning and building rules in Scotland
Planning rules in Scotland differ: rooflights are treated as external alterations under Class 2B, with no permitted development in conservation areas. Flats and tenements are outside householder permitted development, so check with the planning authority first.
Scotland's Technical Handbook (section 6) asks for windows, doors and rooflights in an extension to average 1.4–1.6 W/m²K, with no single unit worse than 3.3 W/m²K. Forming a new opening normally involves structural work, so check with the local authority verifier whether a building warrant is needed.
Guide prices
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or triple glazed (1500 × 2500 mm and up) | £2,395 – £4,195 | £1,995 – £3,495 |
| Mid-size double glazed (1000 × 2000 mm) Typical | £1,675 – £2,395 | £1,395 – £1,995 |
| Small double glazed (up to 1000 × 1000 mm) | £1,195 – £1,795 | £995 – £1,495 |
How the job runs
- Tell us about the roof. Send the postcode, rough sizes and a photo or two through the form, WhatsApp or the guide-price tool.
- Free survey. For new installations a surveyor measures the opening, checks the roof build-up and talks through glass and options.
- Fixed written quote. You get the product, the work and the price in writing. Nothing is ordered or paid for until you agree.
- Fitting and handover. We fit, seal and make good, then hand over product data, warranties and any certificate paperwork.
Flat rooflights in nearby areas
Common questions
Will it make the room too hot?
A big unglazed-to-sky area can add solar gain in summer. Solar-control glass, a blind, or pairing a fixed unit with an opening one keeps it comfortable.
How long does it take?
Fitting into a prepared upstand usually takes a day. Forming a new opening in an existing roof, including making good inside, is often two to three days.
Can a flat rooflight be walked on?
Not unless it is designed as a walk-on unit with structural laminated glass. A standard flat rooflight is for light only — if the roof is used as a terrace, choose a walk-on rooflight instead.
Can you fit into my existing flat roof?
Yes. We form a new opening, trim the joists, build and waterproof an upstand and make good the ceiling. A survey confirms the joist direction and roof build-up first.
Do I need to be at home for the survey in Renfrewshire and Inverclyde?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
