What are rooflight upstands & kerbs?
Across Argyll and Bute, our rooflight upstands & kerbs work covers insulated kerbs built and waterproofed to suit your rooflight. Survey first, fixed price second, fitting third.
Tenements and flats are common in Scottish towns and cities, where rooflights over stairwells and top-floor flats need the owners' and factor's agreement. Stone villas, cottages and conservation areas across Scotland often call for conservation rooflights in slate roofs.
Towns in Argyll and Bute
Specification options in Argyll and Bute
- Proprietary insulated kerbs
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Upstand repairs and rebuilds
- Internal plaster-box linings
- Timber upstands with insulation
- Fixings and falls agreed with the rooflight maker
- Matched to your roof covering
Planning and building rules in Scotland
Scottish householder permitted development (Class 2B, other external alterations) can cover a rooflight that projects no more than 1 metre from the roof, but the right does not apply in conservation areas. Flats and tenements are outside householder permitted development, so check with the planning authority first.
Under the Scottish building standards, replacement rooflights should average 1.6 W/m²K or better, and no individual unit should exceed 3.3 W/m²K. Replacing a rooflight, frame included, does not need a building warrant, but the work must still meet the building standards.
What do rooflight upstands & kerbs cost in Argyll and Bute?
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
How the job runs
- Tell us about the roof. Send the postcode, rough sizes and a photo or two through the form, WhatsApp or the guide-price tool.
- Free survey. For new installations a surveyor measures the opening, checks the roof build-up and talks through glass and options.
- Fixed written quote. You get the product, the work and the price in writing. Nothing is ordered or paid for until you agree.
- Fitting and handover. We fit, seal and make good, then hand over product data, warranties and any certificate paperwork.
Upstands & kerbs in nearby areas
Common questions
Does every rooflight need an upstand?
Flat and dome rooflights do. Pitched roof windows use flashing kits instead.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
Do you offer rooflight upstands & kerbs across Argyll and Bute?
Yes, in most places. We carry out rooflight upstands & kerbs across Argyll and Bute, including Dunoon, Helensburgh, Lochgilphead. Campbeltown, Oban, Rothesay are by arrangement.
