What are rooflight upstands & kerbs?
Across Gloucestershire, our rooflight upstands & kerbs work covers insulated kerbs built and waterproofed to suit your rooflight. Survey first, fixed price second, fitting third.
Stone cottages, slate roofs and conservation areas are common in the South West, and conservation-profile rooflights keep the roofline quiet. Many South West towns mix Georgian and Victorian terraces with modern estates, so the right product differs street by street.
Towns in Gloucestershire
Specification options in Gloucestershire
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Timber upstands with insulation
- Proprietary insulated kerbs
- Upstand repairs and rebuilds
- Raised upstands for deep green or ballasted roofs
- Insulated to avoid a cold bridge
- Fixings and falls agreed with the rooflight maker
Planning and building rules in England
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
What do rooflight upstands & kerbs cost in Gloucestershire?
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
How the job runs
- Tell us about the roof. Send the postcode, rough sizes and a photo or two through the form, WhatsApp or the guide-price tool.
- Free survey. For new installations a surveyor measures the opening, checks the roof build-up and talks through glass and options.
- Fixed written quote. You get the product, the work and the price in writing. Nothing is ordered or paid for until you agree.
- Fitting and handover. We fit, seal and make good, then hand over product data, warranties and any certificate paperwork.
Upstands & kerbs in nearby areas
Common questions
Does every rooflight need an upstand?
Flat and dome rooflights do. Pitched roof windows use flashing kits instead.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
Do I need to be at home for the survey in Gloucestershire?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
