Rooflight upstands & kerbs in Leicestershire: the essentials
Our rooflight upstands & kerbs service in Leicestershire covers insulated kerbs built and waterproofed to suit your rooflight. We survey every job before fixing the price.
Midlands housing is a mix of Victorian terraces, inter-war semis and newer estates, and rear kitchen extensions with flat rooflights are a common upgrade. Industrial and commercial units around Midlands towns often still have their original rooflight sheets, which are due for replacement.
Towns in Leicestershire
What you can choose
- Upstand repairs and rebuilds
- Timber upstands with insulation
- Proprietary insulated kerbs
- Internal plaster-box linings
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Correct height above the finished roof
- Built square to the rooflight size
Planning and building rules in England
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Guide prices
These are typical supply-and-fit ranges. For an address in Leicestershire, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
How the job runs
- Tell us about the roof. Send the postcode, rough sizes and a photo or two through the form, WhatsApp or the guide-price tool.
- Free survey. For new installations a surveyor measures the opening, checks the roof build-up and talks through glass and options.
- Fixed written quote. You get the product, the work and the price in writing. Nothing is ordered or paid for until you agree.
- Fitting and handover. We fit, seal and make good, then hand over product data, warranties and any certificate paperwork.
Upstands & kerbs in nearby areas
Common questions
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
Will I need planning permission in Leicestershire?
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof.
