What is skylight installation?
Skylight installation in Derbyshire means survey, supply and fit — new openings, extensions and fit-only work. Every quote follows a survey of the roof and the room below.
Older terraced streets in Midlands towns often have back additions and side passages that suit a ridge rooflight or long flat rooflight. Many Midlands semis have had a single-storey rear extension added, and a larger flat rooflight or lantern is often the change that makes it feel finished.
Towns in Derbyshire
Options we can specify
- Fit only (customer-supplied units)
- Electrics coordination
- Upstands and flashings
- New openings with joist trimming
- Internal plaster reveal
- Free survey for new installations
- Fit-only for units you have bought
Planning and building rules in England
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Guide prices
Prices below are shown including and excluding VAT. In Derbyshire, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| New opening in an existing roof, supply and fit | £2,395 – £5,395 | £1,995 – £4,495 |
| Supply and fit into a new extension Typical | £1,435 – £3,595 | £1,195 – £2,995 |
| Fit only, customer-supplied unit | £595 – £1,195 | £495 – £995 |
How the job runs
- Tell us about the roof. Send the postcode, rough sizes and a photo or two through the form, WhatsApp or the guide-price tool.
- Free survey. For new installations a surveyor measures the opening, checks the roof build-up and talks through glass and options.
- Fixed written quote. You get the product, the work and the price in writing. Nothing is ordered or paid for until you agree.
- Fitting and handover. We fit, seal and make good, then hand over product data, warranties and any certificate paperwork.
Installation in nearby areas
Common questions
Do you fit rooflights bought elsewhere?
Yes. We check the product and the opening first, and our workmanship terms cover the fitting rather than the product.
Do I need a structural engineer?
For new openings that cut joists or rafters, a structural check is sensible and building control may ask for calculations.
How long does installation take?
Fitting into a prepared upstand takes about a day. A new opening in an existing roof, including making good, often takes two to three days.
Is the survey free?
Yes, for new installations. Repair visits are charged.
Will I need planning permission in Derbyshire?
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof.
