Rooflight upstands & kerbs in Dundee and Angus: the essentials
Our rooflight upstands & kerbs service in Dundee and Angus covers insulated kerbs built and waterproofed to suit your rooflight. We survey every job before fixing the price.
Tenements and flats are common in Scottish towns and cities, where rooflights over stairwells and top-floor flats need the owners' and factor's agreement. Short winter days in Scotland make every square metre of overhead glass count, so rooflight sizing matters.
Towns in Dundee and Angus
Specification options in Dundee and Angus
- Timber upstands with insulation
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Internal plaster-box linings
- Raised upstands for deep green or ballasted roofs
- Proprietary insulated kerbs
- Fixings and falls agreed with the rooflight maker
- Correct height above the finished roof
Planning and building rules in Scotland
Scottish householder permitted development (Class 2B, other external alterations) can cover a rooflight that projects no more than 1 metre from the roof, but the right does not apply in conservation areas. Listed buildings need listed building consent where the work affects their character.
Scotland's Technical Handbook (section 6) asks for windows, doors and rooflights in an extension to average 1.4–1.6 W/m²K, with no single unit worse than 3.3 W/m²K. Replacing a rooflight, frame included, does not need a building warrant, but the work must still meet the building standards.
Rooflight upstands & kerbs prices in Dundee and Angus
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
How the job runs
- Tell us about the roof. Send the postcode, rough sizes and a photo or two through the form, WhatsApp or the guide-price tool.
- Free survey. For new installations a surveyor measures the opening, checks the roof build-up and talks through glass and options.
- Fixed written quote. You get the product, the work and the price in writing. Nothing is ordered or paid for until you agree.
- Fitting and handover. We fit, seal and make good, then hand over product data, warranties and any certificate paperwork.
Upstands & kerbs in nearby areas
Common questions
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
Does every rooflight need an upstand?
Flat and dome rooflights do. Pitched roof windows use flashing kits instead.
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
Do I need to be at home for the survey in Dundee and Angus?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
