What do rooflight upstands & kerbs in Dundee involve?
We handle rooflight upstands & kerbs across Dundee and Angus, including Dundee. In short: insulated kerbs built and waterproofed to suit your rooflight. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Short winter days in Scotland make every square metre of overhead glass count, so rooflight sizing matters. Rooflight upstands & kerbs suit roofs where the old kerb is low, cold or leaking.
Dundee is the main town we list in Dundee and Angus; we also cover nearby Carnoustie and Cupar.
Specification options
- Timber upstands with insulation
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Internal plaster-box linings
- Proprietary insulated kerbs
- Raised upstands for deep green or ballasted roofs
- Fixings and falls agreed with the rooflight maker
- Membrane dressed up and sealed
What to check first
- Upstand size must match the unit within a tight tolerance
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
Planning and building rules for Dundee
In Scotland most rooflights on houses fall under Class 2B permitted development; in a conservation area, or on a listed building, consent is needed. Flats and tenements are outside householder permitted development, so check with the planning authority first.
Scottish energy standards for glazing, including rooflights, use an area-weighted average of 1.4–1.6 W/m²K in extensions, so most modern units comply comfortably. Replacing a rooflight, frame included, does not need a building warrant, but the work must still meet the building standards.
Our planning guide covers each nation in more detail.
What do rooflight upstands & kerbs cost in Dundee?
Prices below are shown including and excluding VAT. In Dundee, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
The process, step by step
- Tell us what you have. Send the DD1 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Nearby towns
Related work in Dundee
Rooflight upstands & kerbs in Dundee: questions
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
Will I need planning permission in Dundee?
Planning rules in Scotland differ: rooflights are treated as external alterations under Class 2B, with no permitted development in conservation areas.
Is the survey in Dundee free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
