Rooflight upstands & kerbs for Clydebank: the essentials
Our rooflight upstands & kerbs service in Clydebank covers insulated kerbs built and waterproofed to suit your rooflight. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Scottish weather is hard on roofs, so we specify rooflights and roof windows with exposure in mind and fit upstands with generous heights. Rooflight upstands & kerbs suit new flat-roof openings and rooflight replacements.
We work across Glasgow and Dunbartonshire, including Clydebank, and in neighbouring towns such as Erskine and Renfrew. Access, parking and how the glass reaches the roof are all checked at the survey.
Options we can specify in Clydebank
- Timber upstands with insulation
- Internal plaster-box linings
- Proprietary insulated kerbs
- Raised upstands for deep green or ballasted roofs
- Upstand repairs and rebuilds
- Membrane dressed up and sealed
- Built square to the rooflight size
Things we check at survey
- Upstand size must match the unit within a tight tolerance
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
Consents for rooflight upstands & kerbs in Clydebank
Scottish householder permitted development (Class 2B, other external alterations) can cover a rooflight that projects no more than 1 metre from the roof, but the right does not apply in conservation areas. Listed buildings need listed building consent where the work affects their character.
Scottish energy standards for glazing, including rooflights, use an area-weighted average of 1.4–1.6 W/m²K in extensions, so most modern units comply comfortably. Replacing a rooflight, frame included, does not need a building warrant, but the work must still meet the building standards.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Clydebank
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
How the job runs
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Rooflight upstands & kerbs near Clydebank
Related work in Clydebank
Common questions
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
Will I need planning permission in Clydebank?
In Scotland most rooflights on houses fall under Class 2B permitted development; in a conservation area, or on a listed building, consent is needed.
Do you offer rooflight upstands & kerbs in Clydebank?
Yes. We carry out rooflight upstands & kerbs in Clydebank and across Glasgow and Dunbartonshire. Send your postcode and we will offer a survey date when we reply.
