What do rooflight upstands & kerbs in Ilford involve?
Our rooflight upstands & kerbs service in Ilford covers insulated kerbs built and waterproofed to suit your rooflight. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
London homes often run deep from front to back, so the middle of the ground floor is the darkest space — exactly where an overhead rooflight earns its keep. Think of rooflight upstands & kerbs for new flat-roof openings and rooflight replacements.
Neighbouring towns include Barking (3 km) and Leytonstone (5 km). We offer a survey date when we reply to your enquiry.
Specification options
- Proprietary insulated kerbs
- Upstand repairs and rebuilds
- Internal plaster-box linings
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Raised upstands for deep green or ballasted roofs
- Insulated to avoid a cold bridge
- Matched to your roof covering
Before you order: points to check
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
- Membrane compatibility with the rooflight's sealants
Consents for rooflight upstands & kerbs in Ilford
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Ilford
Prices below are shown including and excluding VAT. In Ilford, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
From enquiry to finished job
- Tell us what you have. Send the IG1 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Nearby towns
Other services in Ilford
Rooflight upstands & kerbs in Ilford: questions
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
How do I book a survey in Ilford?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
Do I need to be at home for the survey in Ilford?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
