How we approach rooflight upstands & kerbs in Cheadle Hulme
Rooflight upstands & kerbs in Cheadle Hulme means insulated kerbs built and waterproofed to suit your rooflight. We cover the SK8 district and the rest of Greater Manchester, with a survey before any price is fixed.
Exposed hillside towns in the North West need flashing and seal details that cope with wind-driven rain. Typical uses for rooflight upstands & kerbs include roofs where the old kerb is low, cold or leaking.
Cheadle Hulme is around 12 km from Manchester, and we survey and fit throughout that part of Greater Manchester, including the SK8 district.
Specification options
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Upstand repairs and rebuilds
- Proprietary insulated kerbs
- Internal plaster-box linings
- Raised upstands for deep green or ballasted roofs
- Fixings and falls agreed with the rooflight maker
- Correct height above the finished roof
Before you order: points to check
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
- Insulation continuity around the upstand affects condensation
Planning and building rules for Cheadle Hulme
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Cheadle Hulme
Prices below are shown including and excluding VAT. In Cheadle Hulme, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
From enquiry to finished job
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Cheadle Hulme address.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
More we do in Cheadle Hulme
Questions about rooflight upstands & kerbs in Cheadle Hulme
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Does every rooflight need an upstand?
Flat and dome rooflights do. Pitched roof windows use flashing kits instead.
How do I book a survey in Cheadle Hulme?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
Can you work alongside my builder in Cheadle Hulme?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
