Free survey for new installsFixed written quoteEngland, Wales, Scotland & NI
Call 0800 088 6248
SkylightCompany.uk
Upstands & kerbs · Greater Manchester

Rooflight upstands & kerbs in Droylsden

Rooflight upstands & kerbs in Droylsden: a measured specification, a written fixed price and work that pays attention to where leaks really start.

  • Planning and building-regs points explained
  • Fixed price in writing before work starts
  • Upstand, flashing and making good set out in your quote

Quote for Droylsden

Free survey for new installs · we aim to reply within one working day

Enter a UK postcode.
Choose an option.
Enter your name.
Enter a phone number we can call.
Check the email address.

We use your details to answer this enquiry and arrange your survey. They pass through our form, chat and hosting providers and are shared only with the surveyor or installer working for us on your job — see our privacy notice.

M43Postcode district
Greater ManchesterCounty / region
3 kmto Failsworth
£355Guide price from (inc VAT)

Rooflight upstands & kerbs in Droylsden: what is involved?

We handle rooflight upstands & kerbs across Greater Manchester, including Droylsden. In short: insulated kerbs built and waterproofed to suit your rooflight. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.

Stone and brick terraces are typical across the North West, and roof windows in rear slopes are a common way to light attic rooms. In Droylsden, as anywhere, rooflight upstands & kerbs are the usual choice for new flat-roof openings and rooflight replacements.

From Droylsden to Failsworth, Denton and Ashton-under-Lyne, the same survey-first process applies: measure, specify, fix the price, then fit.

Specification options

  • Raised upstands for deep green or ballasted roofs
  • Upstand repairs and rebuilds
  • Internal plaster-box linings
  • Upstands to suit single-ply, felt, GRP or liquid roofs
  • Proprietary insulated kerbs
  • Membrane dressed up and sealed
  • Built square to the rooflight size

Things we check at survey

  • Membrane compatibility with the rooflight's sealants
  • Upstand size must match the unit within a tight tolerance

Do you need permission in Droylsden?

English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.

For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.

See our building regulations guide for U-values, glazing limits and self-certification.

Guide prices for Droylsden

Prices below are shown including and excluding VAT. In Droylsden, as elsewhere, making good inside and access equipment are the main variables.

OptionGuide price inc VATEx VAT
Large or raised upstand£715 – £1,195£595 – £995
Standard insulated upstand Typical£475 – £715£395 – £595
Small upstand on new roof£355 – £475£295 – £395

From enquiry to finished job

  1. Send the details. Postcode, rough size and a photo of the roof and room.
  2. Survey. We measure the opening, check the roof build-up and agree the options.
  3. Written price. You receive a fixed price listing the unit, the work and the lead time.
  4. Fitting and handover. We install, clean down and leave product and warranty documents.

Nearby towns

Other services in Droylsden

Questions about rooflight upstands & kerbs in Droylsden

Can an old upstand be reused?

If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.

Can I build the upstand myself?

Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.

How high should a rooflight upstand be?

High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.

Can you work alongside my builder in Droylsden?

Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.

Is the survey in Droylsden free?

Yes for new installations. Repair visits are charged, and we tell you the price before we book.

Free survey · fixed written quote

Plan the light before you build

Fixed written quotes after a free survey for new installations.

CallFree quote