How we approach rooflight upstands & kerbs in Hindley
For Hindley homes and buildings we offer rooflight upstands & kerbs: insulated kerbs built and waterproofed to suit your rooflight. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Stone and brick terraces are typical across the North West, and roof windows in rear slopes are a common way to light attic rooms. Typical uses for rooflight upstands & kerbs include new flat-roof openings and rooflight replacements.
Hindley sits about 4 km from Wigan and 4 km from Westhoughton, and we cover the whole WN2 postcode district and the roads in between.
Specification options
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Raised upstands for deep green or ballasted roofs
- Proprietary insulated kerbs
- Upstand repairs and rebuilds
- Timber upstands with insulation
- Insulated to avoid a cold bridge
- Membrane dressed up and sealed
What to check first
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
- Membrane compatibility with the rooflight's sealants
Consents for rooflight upstands & kerbs in Hindley
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Read the planning permission guide before you commit to a design.
What do rooflight upstands & kerbs cost in Hindley?
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
From enquiry to finished job
- Send the details. Postcode, rough size and a photo of the roof and room.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Nearby towns
Other services in Hindley
Rooflight upstands & kerbs in Hindley: questions
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
Do I need to be at home for the survey in Hindley?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Will I need planning permission in Hindley?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
