Rooflight upstands & kerbs for Royton: the essentials
We handle rooflight upstands & kerbs across Greater Manchester, including Royton. In short: insulated kerbs built and waterproofed to suit your rooflight. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Converted mills and warehouses in the North West often have large rooflights or glass roofs that need specialist replacement. Think of rooflight upstands & kerbs for roofs where the old kerb is low, cold or leaking.
Royton is around 12 km from Manchester, and we survey and fit throughout that part of Greater Manchester, including the OL2 district.
Options we can specify in Royton
- Raised upstands for deep green or ballasted roofs
- Timber upstands with insulation
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Proprietary insulated kerbs
- Upstand repairs and rebuilds
- Matched to your roof covering
- Built square to the rooflight size
What to check first
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
- Membrane compatibility with the rooflight's sealants
Do you need permission in Royton?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Our planning guide covers each nation in more detail.
Rooflight upstands & kerbs prices in Royton
Guide prices for rooflight upstands & kerbs in Royton are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
The process, step by step
- Send the details. Postcode, rough size and a photo of the roof and room.
- Measure and check. A surveyor visits Royton, measures and checks structure and access.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
Other services in Royton
Rooflight upstands & kerbs in Royton: questions
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
Do you offer rooflight upstands & kerbs in Royton?
Yes. We carry out rooflight upstands & kerbs in Royton and across Greater Manchester. Send your postcode and we will offer a survey date when we reply.
How do I book a survey in Royton?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
