How we approach rooflight upstands & kerbs in Hamilton
Thinking about rooflight upstands & kerbs in Hamilton? The short answer: insulated kerbs built and waterproofed to suit your rooflight. The longer answer depends on your roof, which is why we survey before we price.
Stone villas, cottages and conservation areas across Scotland often call for conservation rooflights in slate roofs. Think of rooflight upstands & kerbs for roofs where the old kerb is low, cold or leaking.
Neighbouring towns include Motherwell (4 km) and Wishaw (7 km). We offer a survey date when we reply to your enquiry.
Choices for your Hamilton project
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Raised upstands for deep green or ballasted roofs
- Proprietary insulated kerbs
- Timber upstands with insulation
- Upstand repairs and rebuilds
- Membrane dressed up and sealed
- Insulated to avoid a cold bridge
What to check first
- Membrane compatibility with the rooflight's sealants
- Insulation continuity around the upstand affects condensation
Consents for rooflight upstands & kerbs in Hamilton
In Scotland most rooflights on houses fall under Class 2B permitted development; in a conservation area, or on a listed building, consent is needed. Flats and tenements are outside householder permitted development, so check with the planning authority first.
Scotland's Technical Handbook (section 6) asks for windows, doors and rooflights in an extension to average 1.4–1.6 W/m²K, with no single unit worse than 3.3 W/m²K. Forming a new opening normally involves structural work, so check with the local authority verifier whether a building warrant is needed.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Hamilton
These are typical supply-and-fit ranges. For an address in Hamilton, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
How the job runs
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Rooflight upstands & kerbs near Hamilton
More we do in Hamilton
Common questions
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Do I need to be at home for the survey in Hamilton?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Do you offer rooflight upstands & kerbs in Hamilton?
Yes. We carry out rooflight upstands & kerbs in Hamilton and across Lanarkshire. Send your postcode and we will offer a survey date when we reply.
