How we approach rooflight upstands & kerbs in Skegness
For Skegness homes and buildings we offer rooflight upstands & kerbs: insulated kerbs built and waterproofed to suit your rooflight. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Bungalows are common across parts of the Midlands, and sun tunnels or roof windows are a quick way to brighten internal hallways. Think of rooflight upstands & kerbs for roofs where the old kerb is low, cold or leaking.
We work across Lincolnshire, including Skegness, and in neighbouring towns such as Boston and King's Lynn. Access, parking and how the glass reaches the roof are all checked at the survey.
Choices for your Skegness project
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Timber upstands with insulation
- Internal plaster-box linings
- Upstand repairs and rebuilds
- Proprietary insulated kerbs
- Correct height above the finished roof
- Built square to the rooflight size
Before you order: points to check
- Insulation continuity around the upstand affects condensation
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
Consents for rooflight upstands & kerbs in Skegness
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Skegness
Guide prices for rooflight upstands & kerbs in Skegness are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
How the job runs
- Send the details. Postcode, rough size and a photo of the roof and room.
- Measure and check. A surveyor visits Skegness, measures and checks structure and access.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Nearby towns
More we do in Skegness
Common questions
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Is the survey in Skegness free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Can you work alongside my builder in Skegness?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
