Rooflight upstands & kerbs in Somerset: the essentials
Our rooflight upstands & kerbs service in Somerset covers insulated kerbs built and waterproofed to suit your rooflight. We survey every job before fixing the price.
Many South West towns mix Georgian and Victorian terraces with modern estates, so the right product differs street by street. Western coasts take wind-driven rain, so we pay close attention to upstand height and flashing laps on exposed roofs.
Towns in Somerset
Specification options in Somerset
- Internal plaster-box linings
- Timber upstands with insulation
- Raised upstands for deep green or ballasted roofs
- Proprietary insulated kerbs
- Upstand repairs and rebuilds
- Built square to the rooflight size
- Matched to your roof covering
Planning and building rules in England
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Rooflight upstands & kerbs prices in Somerset
Prices below are shown including and excluding VAT. In Somerset, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
How the job runs
- Tell us about the roof. Send the postcode, rough sizes and a photo or two through the form, WhatsApp or the guide-price tool.
- Free survey. For new installations a surveyor measures the opening, checks the roof build-up and talks through glass and options.
- Fixed written quote. You get the product, the work and the price in writing. Nothing is ordered or paid for until you agree.
- Fitting and handover. We fit, seal and make good, then hand over product data, warranties and any certificate paperwork.
Upstands & kerbs in nearby areas
Common questions
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
Do you offer rooflight upstands & kerbs across Somerset?
Yes. We carry out rooflight upstands & kerbs across Somerset, including Bath, Weston-super-Mare, Taunton.
