What do rooflight upstands & kerbs in Cannock involve?
Our rooflight upstands & kerbs service in Cannock covers insulated kerbs built and waterproofed to suit your rooflight. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Many Midlands semis have had a single-storey rear extension added, and a larger flat rooflight or lantern is often the change that makes it feel finished. In Cannock, as anywhere, rooflight upstands & kerbs are the usual choice for new flat-roof openings and rooflight replacements.
Neighbouring towns include Burntwood (7 km) and Bloxwich (8 km). We offer a survey date when we reply to your enquiry.
Choices for your Cannock project
- Internal plaster-box linings
- Raised upstands for deep green or ballasted roofs
- Proprietary insulated kerbs
- Upstand repairs and rebuilds
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Membrane dressed up and sealed
- Matched to your roof covering
Things we check at survey
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
- Insulation continuity around the upstand affects condensation
Planning, building control and Cannock
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Read the planning permission guide before you commit to a design.
Rooflight upstands & kerbs prices in Cannock
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
From enquiry to finished job
- Tell us what you have. Send the WS11 postcode, a rough size and a couple of photos.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Rooflight upstands & kerbs near Cannock
Other services in Cannock
Common questions
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Do you offer rooflight upstands & kerbs in Cannock?
Yes. We carry out rooflight upstands & kerbs in Cannock and across Staffordshire. Send your postcode and we will offer a survey date when we reply.
How do I book a survey in Cannock?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
