What do rooflight upstands & kerbs in Kidsgrove involve?
For Kidsgrove homes and buildings we offer rooflight upstands & kerbs: insulated kerbs built and waterproofed to suit your rooflight. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Bungalows are common across parts of the Midlands, and sun tunnels or roof windows are a quick way to brighten internal hallways. Think of rooflight upstands & kerbs for new flat-roof openings and rooflight replacements.
Kidsgrove sits about 9 km from Congleton and 10 km from Newcastle-under-Lyme, and we cover the whole ST7 postcode district and the roads in between.
Choices for your Kidsgrove project
- Timber upstands with insulation
- Internal plaster-box linings
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Raised upstands for deep green or ballasted roofs
- Proprietary insulated kerbs
- Membrane dressed up and sealed
- Correct height above the finished roof
What to check first
- Insulation continuity around the upstand affects condensation
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
Planning and building rules for Kidsgrove
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
Rooflight upstands & kerbs prices in Kidsgrove
Prices below are shown including and excluding VAT. In Kidsgrove, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
The process, step by step
- Send the details. Postcode, rough size and a photo of the roof and room.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
More we do in Kidsgrove
Rooflight upstands & kerbs in Kidsgrove: questions
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
Do I need to be at home for the survey in Kidsgrove?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Can you work alongside my builder in Kidsgrove?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
