How we approach rooflight upstands & kerbs in Bradford
Thinking about rooflight upstands & kerbs in Bradford? The short answer: insulated kerbs built and waterproofed to suit your rooflight. The longer answer depends on your roof, which is why we survey before we price.
Stone-built terraces are common across Yorkshire, and roof windows in the rear slope are a popular way to light attic rooms. In Bradford, as anywhere, rooflight upstands & kerbs are the usual choice for new flat-roof openings and rooflight replacements.
Bradford is around 13 km from Leeds, and we survey and fit throughout that part of West Yorkshire, including the BD1 district.
Specification options
- Internal plaster-box linings
- Upstand repairs and rebuilds
- Timber upstands with insulation
- Proprietary insulated kerbs
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Insulated to avoid a cold bridge
- Fixings and falls agreed with the rooflight maker
Before you order: points to check
- Insulation continuity around the upstand affects condensation
- Upstand size must match the unit within a tight tolerance
Do you need permission in Bradford?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Read the planning permission guide before you commit to a design.
What do rooflight upstands & kerbs cost in Bradford?
Prices below are shown including and excluding VAT. In Bradford, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
From enquiry to finished job
- Tell us what you have. Send the BD1 postcode, a rough size and a couple of photos.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Nearby towns
More we do in Bradford
Rooflight upstands & kerbs in Bradford: questions
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
How do I book a survey in Bradford?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
Can you work alongside my builder in Bradford?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
