What do rooflight upstands & kerbs in Morley involve?
We handle rooflight upstands & kerbs across West Yorkshire, including Morley. In short: insulated kerbs built and waterproofed to suit your rooflight. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Conservation areas and stone villages across Yorkshire often call for conservation rooflights in slate or stone-slate roofs. In Morley, as anywhere, rooflight upstands & kerbs are the usual choice for roofs where the old kerb is low, cold or leaking.
From Morley to Batley, Dewsbury and Lofthouse, the same survey-first process applies: measure, specify, fix the price, then fit.
Options we can specify in Morley
- Timber upstands with insulation
- Internal plaster-box linings
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Proprietary insulated kerbs
- Upstand repairs and rebuilds
- Built square to the rooflight size
- Membrane dressed up and sealed
Things we check at survey
- Insulation continuity around the upstand affects condensation
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
Consents for rooflight upstands & kerbs in Morley
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.
Our planning guide covers each nation in more detail.
Rooflight upstands & kerbs prices in Morley
These are typical supply-and-fit ranges. For an address in Morley, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
How the job runs
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Morley address.
- Measure and check. A surveyor visits Morley, measures and checks structure and access.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Neighbouring towns
Other services in Morley
Questions about rooflight upstands & kerbs in Morley
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
Does every rooflight need an upstand?
Flat and dome rooflights do. Pitched roof windows use flashing kits instead.
Do you offer rooflight upstands & kerbs in Morley?
Yes. We carry out rooflight upstands & kerbs in Morley and across West Yorkshire. Send your postcode and we will offer a survey date when we reply.
How do I book a survey in Morley?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
