What do bespoke & shaped rooflights in Poole involve?
Thinking about bespoke & shaped rooflights in Poole? The short answer: triangular, angled, curved and multi-pane rooflights made to measure. The longer answer depends on your roof, which is why we survey before we price.
Many South West towns mix Georgian and Victorian terraces with modern estates, so the right product differs street by street. In Poole, as anywhere, bespoke & shaped rooflights are the usual choice for angled ceilings, corners and architect-designed extensions.
From Poole to Bournemouth, Wimborne Minster and Christchurch, the same survey-first process applies: measure, specify, fix the price, then fit.
Choices for your Poole project
- Triangular and trapezoid panes
- Multi-pane butt-jointed runs
- Concealed or slim frames
- Solar-control and low-iron glass
- Sloped or monopitch rooflights
- Structural or framed options
- Corner, slope and multi-pane runs
Before you order: points to check
- Large panes need a lifting plan
- Precise survey and template may be needed
Consents for bespoke & shaped rooflights in Poole
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Our planning guide covers each nation in more detail.
What do bespoke & shaped rooflights cost in Poole?
Guide prices for bespoke & shaped rooflights in Poole are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Multi-pane or corner run | £9,595 – £17,995 | £7,995 – £14,995 |
| Single shaped pane, large Typical | £5,395 – £9,595 | £4,495 – £7,995 |
| Single shaped pane, small | £4,195 – £5,395 | £3,495 – £4,495 |
What happens next
- Send the details. Postcode, rough size and a photo of the roof and room.
- Measure and check. A surveyor visits Poole, measures and checks structure and access.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Bespoke & shaped rooflights near Poole
Other services in Poole
Common questions
Do you need my architect's drawings?
They help. We still survey on site, because built openings rarely match drawings exactly.
Will a shaped rooflight leak more?
Not if detailed properly — corners and junctions just need more care.
Why does bespoke take longer?
Each unit is drawn, checked and manufactured to order.
Will I need planning permission in Poole?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge.
Do you offer bespoke & shaped rooflights in Poole?
Yes. We carry out bespoke & shaped rooflights in Poole and across Dorset. Send your postcode and we will offer a survey date when we reply.
