How we approach bespoke & shaped rooflights in Stanley
Thinking about bespoke & shaped rooflights in Stanley? The short answer: triangular, angled, curved and multi-pane rooflights made to measure. The longer answer depends on your roof, which is why we survey before we price.
North East terraces and colliery-town housing often have rear offshoots where a rooflight brightens a narrow kitchen. Think of bespoke & shaped rooflights for openings that standard sizes do not fit.
Neighbouring towns include Chester-le-Street (8 km) and Consett (9 km). We offer a survey date when we reply to your enquiry.
Specification options
- Solar-control and low-iron glass
- Corner and wrap-around glazing
- Triangular and trapezoid panes
- Concealed or slim frames
- Multi-pane butt-jointed runs
- Structural or framed options
- Matching solar and thermal performance
Things we check at survey
- Structural support must be designed in
- Precise survey and template may be needed
Do you need permission in Stanley?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
What do bespoke & shaped rooflights cost in Stanley?
Prices below are shown including and excluding VAT. In Stanley, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Multi-pane or corner run | £9,595 – £17,995 | £7,995 – £14,995 |
| Single shaped pane, large Typical | £5,395 – £9,595 | £4,495 – £7,995 |
| Single shaped pane, small | £4,195 – £5,395 | £3,495 – £4,495 |
From enquiry to finished job
- Tell us what you have. Send the DH9 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Neighbouring towns
More we do in Stanley
Bespoke & shaped rooflights in Stanley: questions
Why does bespoke take longer?
Each unit is drawn, checked and manufactured to order.
Can I cancel a bespoke order?
Made-to-measure goods are excluded from the statutory 14-day cancellation right. As a goodwill gesture you can cancel without charge until we place the order with the manufacturer, and we tell you in writing when that happens.
Can bespoke units open?
Some can. Shaped glass is usually fixed, combined with a standard opening unit elsewhere.
Do you offer bespoke & shaped rooflights in Stanley?
Yes. We carry out bespoke & shaped rooflights in Stanley and across Durham. Send your postcode and we will offer a survey date when we reply.
Do I need to be at home for the survey in Stanley?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
