What do bespoke & shaped rooflights in Washington involve?
Thinking about bespoke & shaped rooflights in Washington? The short answer: triangular, angled, curved and multi-pane rooflights made to measure. The longer answer depends on your roof, which is why we survey before we price.
North East terraces and colliery-town housing often have rear offshoots where a rooflight brightens a narrow kitchen. In Washington, as anywhere, bespoke & shaped rooflights are the usual choice for angled ceilings, corners and architect-designed extensions.
From Washington to Chester-le-Street, Felling and Houghton-le-Spring, the same survey-first process applies: measure, specify, fix the price, then fit.
Options we can specify in Washington
- Concealed or slim frames
- Corner and wrap-around glazing
- Solar-control and low-iron glass
- Multi-pane butt-jointed runs
- Triangular and trapezoid panes
- Glass shaped to the architecture
- Structural or framed options
What to check first
- Structural support must be designed in
- Precise survey and template may be needed
Consents for bespoke & shaped rooflights in Washington
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.
Read the planning permission guide before you commit to a design.
Guide prices for Washington
Guide prices for bespoke & shaped rooflights in Washington are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Multi-pane or corner run | £9,595 – £17,995 | £7,995 – £14,995 |
| Single shaped pane, large Typical | £5,395 – £9,595 | £4,495 – £7,995 |
| Single shaped pane, small | £4,195 – £5,395 | £3,495 – £4,495 |
What happens next
- Tell us what you have. Send the NE37 postcode, a rough size and a couple of photos.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Neighbouring towns
More we do in Washington
Questions about bespoke & shaped rooflights in Washington
Can any shape be made?
Most straight-edged shapes can be made in glass, within the manufacturer's size and angle limits. Curved glass is possible but specialist.
Will a shaped rooflight leak more?
Not if detailed properly — corners and junctions just need more care.
Why does bespoke take longer?
Each unit is drawn, checked and manufactured to order.
Can you work alongside my builder in Washington?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
Do you offer bespoke & shaped rooflights in Washington?
Yes. We carry out bespoke & shaped rooflights in Washington and across Tyne and Wear. Send your postcode and we will offer a survey date when we reply.
