Bespoke & shaped rooflights for Fleetwood: the essentials
For Fleetwood homes and buildings we offer bespoke & shaped rooflights: triangular, angled, curved and multi-pane rooflights made to measure. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Stone and brick terraces are typical across the North West, and roof windows in rear slopes are a common way to light attic rooms. Bespoke & shaped rooflights suit openings that standard sizes do not fit.
We work across Lancashire, including Fleetwood, and in neighbouring towns such as Thornton-Cleveleys and Blackpool. Access, parking and how the glass reaches the roof are all checked at the survey.
Options we can specify in Fleetwood
- Solar-control and low-iron glass
- Triangular and trapezoid panes
- Corner and wrap-around glazing
- Multi-pane butt-jointed runs
- Concealed or slim frames
- Glass shaped to the architecture
- Corner, slope and multi-pane runs
Before you order: points to check
- Precise survey and template may be needed
- Structural support must be designed in
Consents for bespoke & shaped rooflights in Fleetwood
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Our planning guide covers each nation in more detail.
Guide prices for Fleetwood
These are typical supply-and-fit ranges. For an address in Fleetwood, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Multi-pane or corner run | £9,595 – £17,995 | £7,995 – £14,995 |
| Single shaped pane, large Typical | £5,395 – £9,595 | £4,495 – £7,995 |
| Single shaped pane, small | £4,195 – £5,395 | £3,495 – £4,495 |
How the job runs
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
Other services in Fleetwood
Questions about bespoke & shaped rooflights in Fleetwood
Can I cancel a bespoke order?
Made-to-measure goods are excluded from the statutory 14-day cancellation right. As a goodwill gesture you can cancel without charge until we place the order with the manufacturer, and we tell you in writing when that happens.
Will a shaped rooflight leak more?
Not if detailed properly — corners and junctions just need more care.
Do you need my architect's drawings?
They help. We still survey on site, because built openings rarely match drawings exactly.
Can you work alongside my builder in Fleetwood?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
Is the survey in Fleetwood free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
