Bespoke & shaped rooflights for Oundle: the essentials
Thinking about bespoke & shaped rooflights in Oundle? The short answer: triangular, angled, curved and multi-pane rooflights made to measure. The longer answer depends on your roof, which is why we survey before we price.
Midlands housing is a mix of Victorian terraces, inter-war semis and newer estates, and rear kitchen extensions with flat rooflights are a common upgrade. In Oundle, as anywhere, bespoke & shaped rooflights are the usual choice for openings that standard sizes do not fit.
Neighbouring towns include Corby (15 km) and Peterborough (18 km). We offer a survey date when we reply to your enquiry.
Specification options
- Sloped or monopitch rooflights
- Concealed or slim frames
- Triangular and trapezoid panes
- Multi-pane butt-jointed runs
- Solar-control and low-iron glass
- Corner, slope and multi-pane runs
- Glass shaped to the architecture
Before you order: points to check
- Structural support must be designed in
- Precise survey and template may be needed
Planning, building control and Oundle
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Our planning guide covers each nation in more detail.
Guide prices for Oundle
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Multi-pane or corner run | £9,595 – £17,995 | £7,995 – £14,995 |
| Single shaped pane, large Typical | £5,395 – £9,595 | £4,495 – £7,995 |
| Single shaped pane, small | £4,195 – £5,395 | £3,495 – £4,495 |
The process, step by step
- Tell us what you have. Send the PE8 postcode, a rough size and a couple of photos.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Bespoke & shaped rooflights near Oundle
More we do in Oundle
Questions about bespoke & shaped rooflights in Oundle
Will a shaped rooflight leak more?
Not if detailed properly — corners and junctions just need more care.
Can bespoke units open?
Some can. Shaped glass is usually fixed, combined with a standard opening unit elsewhere.
Why does bespoke take longer?
Each unit is drawn, checked and manufactured to order.
Will I need planning permission in Oundle?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
Do I need to be at home for the survey in Oundle?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
