Bespoke & shaped rooflights in Bedworth: what is involved?
Our bespoke & shaped rooflights service in Bedworth covers triangular, angled, curved and multi-pane rooflights made to measure. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Midlands housing is a mix of Victorian terraces, inter-war semis and newer estates, and rear kitchen extensions with flat rooflights are a common upgrade. In Bedworth, as anywhere, bespoke & shaped rooflights are the usual choice for openings that standard sizes do not fit.
Neighbouring towns include Nuneaton (5 km) and Coventry (9 km). We offer a survey date when we reply to your enquiry.
What you can choose
- Triangular and trapezoid panes
- Concealed or slim frames
- Sloped or monopitch rooflights
- Multi-pane butt-jointed runs
- Solar-control and low-iron glass
- Matching solar and thermal performance
- Corner, slope and multi-pane runs
What to check first
- Structural support must be designed in
- Longer lead times and no returns on made-to-measure glass
Planning, building control and Bedworth
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Read the planning permission guide before you commit to a design.
Bespoke & shaped rooflights prices in Bedworth
These are typical supply-and-fit ranges. For an address in Bedworth, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Multi-pane or corner run | £9,595 – £17,995 | £7,995 – £14,995 |
| Single shaped pane, large Typical | £5,395 – £9,595 | £4,495 – £7,995 |
| Single shaped pane, small | £4,195 – £5,395 | £3,495 – £4,495 |
The process, step by step
- Tell us what you have. Send the CV12 postcode, a rough size and a couple of photos.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Nearby towns
More we do in Bedworth
Common questions
Can I cancel a bespoke order?
Made-to-measure goods are excluded from the statutory 14-day cancellation right. As a goodwill gesture you can cancel without charge until we place the order with the manufacturer, and we tell you in writing when that happens.
Can any shape be made?
Most straight-edged shapes can be made in glass, within the manufacturer's size and angle limits. Curved glass is possible but specialist.
Why does bespoke take longer?
Each unit is drawn, checked and manufactured to order.
Do I need to be at home for the survey in Bedworth?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
How do I book a survey in Bedworth?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
