Commercial & industrial rooflights for Battersea: the essentials
Commercial & industrial rooflights in Battersea means rooflights for warehouses, schools, offices and retail units. We cover the SW11 district and the rest of Greater London, with a survey before any price is fixed.
Many London roofs are reached only through the house or over neighbouring property, so lifting heavy glass is planned at survey rather than on the day. Think of commercial & industrial rooflights for warehouses, schools, offices and retail units.
Battersea is around 4 km from central London, and we survey and fit throughout that part of Greater London, including the SW11 district.
Options we can specify in Battersea
- Modular glass rooflights
- Mesh or grilles under fragile areas
- Polycarbonate domes
- GRP or polycarbonate in-plane rooflight sheets
- Smoke and natural ventilation vents
- Barrel vaults, ridge lights and modular glass
- Daylight that reduces daytime lighting
Things we check at survey
- Asbestos surveys may be needed on older roofs
- Non-fragility classification should be confirmed for new products
Building control and safety duties in Battersea
For non-domestic buildings, planning depends on the building and its location; building regulations cover thermal performance and the fire classification of rooflights near boundaries. Product data for building control is supplied with every quote.
For buildings other than dwellings, Approved Document L Volume 2 sets limiting U-values of 2.2 W/m²K for rooflights and 3.0 W/m²K for roof ventilators, including smoke vents. Fire classification of rooflight materials near boundaries is checked at specification.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Battersea
These are typical supply-and-fit ranges. For an address in Battersea, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Barrel-vault or modular glass rooflight | £3,595 – £8,395 | £2,995 – £6,995 |
| Commercial flat-glass rooflight Typical | £1,795 – £3,595 | £1,495 – £2,995 |
| Dome or in-plane sheet replacement | £1,075 – £1,795 | £895 – £1,495 |
How the job runs
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Battersea address.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
Related work in Battersea
Common questions
Can you replace old warehouse rooflight sheets?
Yes. We match the roof profile, replace discoloured or damaged sheets and plan safe access while the building stays in use.
Do you supply O&M information?
Yes — product data, manufacturer warranties and maintenance notes are handed over at completion.
Can rooflights double as smoke vents?
Some units are certified smoke ventilators. See our smoke-vent rooflights page.
Do I need to be at home for the survey in Battersea?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Can you work alongside my builder in Battersea?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
