Conservation rooflights for Brixton: the essentials
Thinking about conservation rooflights in Brixton? The short answer: slim, low-profile steel-look rooflights for period and listed roofs. The longer answer depends on your roof, which is why we survey before we price.
Party walls are a fact of life in London terraces, and rooflights close to a shared wall need detailing that keeps the neighbour's side dry too. Typical uses for conservation rooflights include slate and plain-tile roofs where a quiet roofline matters.
From Brixton to Clapham, Dulwich and Peckham, the same survey-first process applies: measure, specify, fix the price, then fit.
Options we can specify in Brixton
- Toughened or laminated double glazing
- Flashings for slate or plain tile
- Steel or aluminium frames
- Manual or electric opening
- Central vertical glazing bar
- Traditional slim profile, sits low in the roof
- Steel or aluminium frame in black or grey
Before you order: points to check
- Conservation officers may specify size and position
- Lead or matching flashings may be required
Consents for conservation rooflights in Brixton
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Brixton
Guide prices for conservation rooflights in Brixton are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or electric conservation rooflight | £2,755 – £4,195 | £2,295 – £3,495 |
| Standard conservation rooflight Typical | £2,035 – £2,755 | £1,695 – £2,295 |
| Small conservation rooflight | £1,795 – £2,155 | £1,495 – £1,795 |
From enquiry to finished job
- Tell us what you have. Send the SW2 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
More we do in Brixton
Conservation rooflights in Brixton: questions
Are conservation rooflights double glazed?
Most modern ones are, with slim units behind the traditional frame.
Do I need consent for a conservation rooflight?
On a listed building you need listed building consent. In a conservation area, check with the council — many areas have Article 4 directions affecting roof alterations.
Will the council accept it?
We cannot promise an outcome, but a slim conservation profile fitted low in the roof is the type many conservation officers ask for.
Do you fit conservation rooflights in Brixton?
Yes. We survey and fit conservation rooflights in Brixton and across Greater London. Send your postcode and we will offer a survey date when we reply.
Can you work alongside my builder in Brixton?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
