How we approach conservation rooflights in Welshpool
Our conservation rooflights service in Welshpool covers slim, low-profile steel-look rooflights for period and listed roofs. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Wales sees a lot of wind-driven rain, particularly in the west, so upstand height and flashing laps matter more than anywhere. Think of conservation rooflights for period, listed and conservation-area roofs.
From Welshpool to Newtown, Rhosllannerchrugog and Wrexham, the same survey-first process applies: measure, specify, fix the price, then fit.
Choices for your Welshpool project
- Manual or electric opening
- Toughened or laminated double glazing
- Steel or aluminium frames
- Central vertical glazing bar
- Blinds
- Double glazed behind a period look
- Steel or aluminium frame in black or grey
What to check first
- Projection above the roof line is limited — usually as flush as possible
- Conservation officers may specify size and position
Do you need permission in Welshpool?
In Wales a rooflight on a house is usually permitted development if it stands no more than 15 cm proud of the roof, except on protected land such as conservation areas and National Parks, where permission is needed. A side-facing rooflight within 10.5 m of the boundary must be obscure-glazed, and non-opening unless the opening part is more than 1.7 m above the floor.
In Wales the limiting values are 2.2 W/m²K for a rooflight and 1.4 W/m²K (or WER Band B) for a roof window in an existing house. A revised Welsh Approved Document L takes effect on 4 March 2027; rooflights in new dwellings stay at 2.2 W/m²K.
See our building regulations guide for U-values, glazing limits and self-certification.
Conservation rooflights prices in Welshpool
Guide prices for conservation rooflights in Welshpool are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or electric conservation rooflight | £2,755 – £4,195 | £2,295 – £3,495 |
| Standard conservation rooflight Typical | £2,035 – £2,755 | £1,695 – £2,295 |
| Small conservation rooflight | £1,795 – £2,155 | £1,495 – £1,795 |
The process, step by step
- Send the details. Postcode, rough size and a photo of the roof and room.
- Measure and check. A surveyor visits Welshpool, measures and checks structure and access.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
Related work in Welshpool
Conservation rooflights in Welshpool: questions
Do they suit slate roofs?
Yes — flashings are made for slates and for plain tiles.
Do I need consent for a conservation rooflight?
On a listed building you need listed building consent. In a conservation area, check with the council — many areas have Article 4 directions affecting roof alterations.
Can they open?
Yes, most are top-hung or side-hung for ventilation and cleaning, with manual or electric operation.
Do I need to be at home for the survey in Welshpool?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Is the survey in Welshpool free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
