Frameless structural rooflights in Cricklewood: what is involved?
Our frameless structural rooflights service in Cricklewood covers minimal glass rooflights with no visible frame from inside. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
London homes often run deep from front to back, so the middle of the ground floor is the darkest space — exactly where an overhead rooflight earns its keep. Think of frameless structural rooflights for rooms where you want sky without a visible frame.
Cricklewood is around 8 km from central London, and we survey and fit throughout that part of Greater London, including the NW2 district.
What you can choose
- Solar-control coatings
- Triple glazing
- Butt-jointed runs for long openings
- Low-iron extra-clear glass
- Heated glass on some ranges
- Can run along party walls and side returns
- Solar-control and low-iron glass options
What to check first
- Structural glass specification comes from the manufacturer
- The internal finish (plaster, shadow gap) is agreed before order
Planning, building control and Cricklewood
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Our planning guide covers each nation in more detail.
Guide prices for Cricklewood
Guide prices for frameless structural rooflights in Cricklewood are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
From enquiry to finished job
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Cricklewood address.
- Measure and check. A surveyor visits Cricklewood, measures and checks structure and access.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Nearby towns
Other services in Cricklewood
Common questions
Is frameless glass as strong as a framed rooflight?
Yes — it is structural glass designed for the job. The support is hidden rather than missing.
How is it lifted onto the roof?
Larger panes go up with a vacuum lifter, a hoist or a crane. We plan access at survey.
Does it cost more?
Usually, because the glass is larger and heavier and the finish needs tighter tolerances. The price table shows typical ranges.
Is the survey in Cricklewood free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Do you fit frameless structural rooflights in Cricklewood?
Yes. We survey and fit frameless structural rooflights in Cricklewood and across Greater London. Send your postcode and we will offer a survey date when we reply.
