How we approach frameless structural rooflights in Kingston upon Thames
Our frameless structural rooflights service in Kingston upon Thames covers minimal glass rooflights with no visible frame from inside. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Many London roofs are reached only through the house or over neighbouring property, so lifting heavy glass is planned at survey rather than on the day. In Kingston upon Thames, as anywhere, frameless structural rooflights are the usual choice for rooms where you want sky without a visible frame.
We work across Greater London, including Kingston upon Thames, and in neighbouring towns such as Twickenham and Richmond. Access, parking and how the glass reaches the roof are all checked at the survey.
What you can choose
- Low-iron extra-clear glass
- Triple glazing
- Butt-jointed runs for long openings
- Heated glass on some ranges
- Solar-control coatings
- Long, slim or very large formats
- Double or triple glazed structural units
Before you order: points to check
- Structural glass specification comes from the manufacturer
- Tolerances are tight — the opening must be built square and to size
Planning and building rules for Kingston upon Thames
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Read the planning permission guide before you commit to a design.
Guide prices for Kingston upon Thames
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
From enquiry to finished job
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Kingston upon Thames address.
- Measure and check. A surveyor visits Kingston upon Thames, measures and checks structure and access.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
More we do in Kingston upon Thames
Questions about frameless structural rooflights in Kingston upon Thames
Does it cost more?
Usually, because the glass is larger and heavier and the finish needs tighter tolerances. The price table shows typical ranges.
Will I see the edge of the glass?
From inside, the reveal is finished up to the glass so the edge is hidden. From outside you will see the glass and its edge seal.
Can a frameless rooflight be walked on?
Only if it is specified as a walk-on unit. Most frameless rooflights are for light only.
How do I book a survey in Kingston upon Thames?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
Is the survey in Kingston upon Thames free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
