Frameless structural rooflights for Tottenham: the essentials
Our frameless structural rooflights service in Tottenham covers minimal glass rooflights with no visible frame from inside. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Victorian and Edwardian terraces with narrow side returns are typical of much of London, and a glass roof or long flat rooflight is the usual way to keep the back rooms bright once the return is built over. Think of frameless structural rooflights for rooms where you want sky without a visible frame.
Tottenham is around 11 km from central London, and we survey and fit throughout that part of Greater London, including the N17 district.
Choices for your Tottenham project
- Butt-jointed runs for long openings
- Shadow-gap or plastered reveal
- Solar-control coatings
- Triple glazing
- Heated glass on some ranges
- Nothing but glass visible from inside
- Double or triple glazed structural units
Before you order: points to check
- Structural glass specification comes from the manufacturer
- Large panes need lifting gear and access planning
Planning, building control and Tottenham
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
See our building regulations guide for U-values, glazing limits and self-certification.
Frameless structural rooflights prices in Tottenham
Prices below are shown including and excluding VAT. In Tottenham, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
The process, step by step
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Tottenham address.
- Measure and check. A surveyor visits Tottenham, measures and checks structure and access.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
More we do in Tottenham
Questions about frameless structural rooflights in Tottenham
Can it open?
Some frameless designs include a sliding or hinged opening element, but most are fixed. Pair with an opening unit if you need ventilation.
Can a frameless rooflight be walked on?
Only if it is specified as a walk-on unit. Most frameless rooflights are for light only.
Does it cost more?
Usually, because the glass is larger and heavier and the finish needs tighter tolerances. The price table shows typical ranges.
Is the survey in Tottenham free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Do I need to be at home for the survey in Tottenham?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
