Frameless structural rooflights in Royton: what is involved?
Our frameless structural rooflights service in Royton covers minimal glass rooflights with no visible frame from inside. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Stone and brick terraces are typical across the North West, and roof windows in rear slopes are a common way to light attic rooms. Typical uses for frameless structural rooflights include architect-led extensions and long slots of light over islands or along party walls.
Royton is around 12 km from Manchester, and we survey and fit throughout that part of Greater Manchester, including the OL2 district.
What you can choose
- Low-iron extra-clear glass
- Triple glazing
- Shadow-gap or plastered reveal
- Solar-control coatings
- Heated glass on some ranges
- Solar-control and low-iron glass options
- Can run along party walls and side returns
Before you order: points to check
- Large panes need lifting gear and access planning
- The internal finish (plaster, shadow gap) is agreed before order
Planning, building control and Royton
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
Frameless structural rooflights prices in Royton
Guide prices for frameless structural rooflights in Royton are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
What happens next
- Tell us what you have. Send the OL2 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Frameless structural rooflights near Royton
Other services in Royton
Common questions
Can it open?
Some frameless designs include a sliding or hinged opening element, but most are fixed. Pair with an opening unit if you need ventilation.
How is it lifted onto the roof?
Larger panes go up with a vacuum lifter, a hoist or a crane. We plan access at survey.
Will I see the edge of the glass?
From inside, the reveal is finished up to the glass so the edge is hidden. From outside you will see the glass and its edge seal.
Is the survey in Royton free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Can you work alongside my builder in Royton?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
