How we approach frameless structural rooflights in Faversham
We handle frameless structural rooflights across Kent, including Faversham. In short: minimal glass rooflights with no visible frame from inside. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Across the South East, single-storey kitchen extensions on 1930s semis and post-war detached houses are where most flat rooflights and lanterns go. In Faversham, as anywhere, frameless structural rooflights are the usual choice for architect-led extensions and long slots of light over islands or along party walls.
Faversham is around 26 km from Maidstone, and we survey and fit throughout that part of Kent, including the ME13 district.
Options we can specify in Faversham
- Heated glass on some ranges
- Triple glazing
- Low-iron extra-clear glass
- Butt-jointed runs for long openings
- Shadow-gap or plastered reveal
- Double or triple glazed structural units
- Can run along party walls and side returns
Things we check at survey
- Tolerances are tight — the opening must be built square and to size
- Large panes need lifting gear and access planning
Do you need permission in Faversham?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Read the planning permission guide before you commit to a design.
Frameless structural rooflights prices in Faversham
Prices below are shown including and excluding VAT. In Faversham, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
What happens next
- Tell us what you have. Send the ME13 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Nearby towns
Other services in Faversham
Questions about frameless structural rooflights in Faversham
How is it lifted onto the roof?
Larger panes go up with a vacuum lifter, a hoist or a crane. We plan access at survey.
Does it cost more?
Usually, because the glass is larger and heavier and the finish needs tighter tolerances. The price table shows typical ranges.
Can a frameless rooflight be walked on?
Only if it is specified as a walk-on unit. Most frameless rooflights are for light only.
Do I need to be at home for the survey in Faversham?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Do you fit frameless structural rooflights in Faversham?
Yes. We survey and fit frameless structural rooflights in Faversham and across Kent. Send your postcode and we will offer a survey date when we reply.
