Frameless structural rooflights for Market Harborough: the essentials
Our frameless structural rooflights service in Market Harborough covers minimal glass rooflights with no visible frame from inside. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Industrial and commercial units around Midlands towns often still have their original rooflight sheets, which are due for replacement. Frameless structural rooflights suit rooms where you want sky without a visible frame.
Market Harborough sits about 16 km from Corby and 16 km from Kettering, and we cover the whole LE16 postcode district and the roads in between.
Choices for your Market Harborough project
- Triple glazing
- Solar-control coatings
- Butt-jointed runs for long openings
- Heated glass on some ranges
- Low-iron extra-clear glass
- Clean modern detail for architect-led schemes
- Long, slim or very large formats
Before you order: points to check
- Structural glass specification comes from the manufacturer
- The internal finish (plaster, shadow gap) is agreed before order
Planning and building rules for Market Harborough
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Read the planning permission guide before you commit to a design.
Frameless structural rooflights prices in Market Harborough
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Long-format or jointed run | £6,595 – £11,995 | £5,495 – £9,995 |
| Large single pane Typical | £4,795 – £7,195 | £3,995 – £5,995 |
| Standard frameless unit | £3,595 – £4,795 | £2,995 – £3,995 |
The process, step by step
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Market Harborough address.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Frameless structural rooflights near Market Harborough
Related work in Market Harborough
Frameless structural rooflights in Market Harborough: questions
How is it lifted onto the roof?
Larger panes go up with a vacuum lifter, a hoist or a crane. We plan access at survey.
Can a frameless rooflight be walked on?
Only if it is specified as a walk-on unit. Most frameless rooflights are for light only.
Will I see the edge of the glass?
From inside, the reveal is finished up to the glass so the edge is hidden. From outside you will see the glass and its edge seal.
Will I need planning permission in Market Harborough?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
Do you fit frameless structural rooflights in Market Harborough?
Yes. We survey and fit frameless structural rooflights in Market Harborough and across Leicestershire. Send your postcode and we will offer a survey date when we reply.
