Rooflight upstands & kerbs in Long Eaton: what is involved?
We handle rooflight upstands & kerbs across Derbyshire, including Long Eaton. In short: insulated kerbs built and waterproofed to suit your rooflight. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Bungalows are common across parts of the Midlands, and sun tunnels or roof windows are a quick way to brighten internal hallways. Rooflight upstands & kerbs suit roofs where the old kerb is low, cold or leaking.
We work across Derbyshire, including Long Eaton, and in neighbouring towns such as Ilkeston and Nottingham. Access, parking and how the glass reaches the roof are all checked at the survey.
Options we can specify in Long Eaton
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Timber upstands with insulation
- Upstand repairs and rebuilds
- Internal plaster-box linings
- Proprietary insulated kerbs
- Built square to the rooflight size
- Insulated to avoid a cold bridge
Things we check at survey
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
- Upstand size must match the unit within a tight tolerance
Consents for rooflight upstands & kerbs in Long Eaton
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.
See our building regulations guide for U-values, glazing limits and self-certification.
Rooflight upstands & kerbs prices in Long Eaton
These are typical supply-and-fit ranges. For an address in Long Eaton, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
The process, step by step
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Long Eaton address.
- Measure and check. A surveyor visits Long Eaton, measures and checks structure and access.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Rooflight upstands & kerbs near Long Eaton
More we do in Long Eaton
Questions about rooflight upstands & kerbs in Long Eaton
Does every rooflight need an upstand?
Flat and dome rooflights do. Pitched roof windows use flashing kits instead.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Will I need planning permission in Long Eaton?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
How do I book a survey in Long Eaton?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
