Pitched roof windows for Long Eaton: the essentials
Pitched roof windows in Long Eaton means centre-pivot and top-hung skylights for tiled and slate roofs. We cover the NG10 district and the rest of Derbyshire, with a survey before any price is fixed.
Older terraced streets in Midlands towns often have back additions and side passages that suit a ridge rooflight or long flat rooflight. Typical uses for pitched roof windows include pitched roofs over bedrooms, stairs and bathrooms.
Long Eaton is around 14 km from Derby, and we survey and fit throughout that part of Derbyshire, including the NG10 district.
What you can choose
- Centre-pivot or top-hung
- Integral blinds and shutters
- Flashings for tiles, slates or recessed fitting
- Double or triple glazing
- Combination and stacked windows
- Blinds and electric opening available
- Fits between rafters in most roofs
Before you order: points to check
- Rafters may need trimming for wider windows
- Front-facing roof windows can need permission in conservation areas
Do you need permission in Long Eaton?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Our planning guide covers each nation in more detail.
Guide prices for Long Eaton
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large top-hung or electric window | £2,155 – £3,355 | £1,795 – £2,795 |
| Standard centre-pivot window Typical | £1,435 – £2,155 | £1,195 – £1,795 |
| Small roof window | £1,075 – £1,555 | £895 – £1,295 |
The process, step by step
- Tell us what you have. Send the NG10 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Nearby towns
More we do in Long Eaton
Questions about pitched roof windows in Long Eaton
Can a roof window be fitted from inside?
In most cases, yes — only the tiles around the opening are lifted, and much of the work is done from inside the loft.
Can you replace an old roof window?
Yes — replacement into the same opening is usually quicker than a new install, often a few hours per window.
Will it need building regulations approval?
Fitting a new roof window usually involves cutting rafters and changing the thermal envelope, so building control approval (or, in England and Wales, a competent-person route) is normally needed. We tell you which applies.
Do I need to be at home for the survey in Long Eaton?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
How do I book a survey in Long Eaton?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
