Rooflight upstands & kerbs for Stanley: the essentials
Our rooflight upstands & kerbs service in Stanley covers insulated kerbs built and waterproofed to suit your rooflight. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Older flat-roofed extensions in the North East are often due a new roof covering — the right time to upgrade the rooflight too. Rooflight upstands & kerbs suit roofs where the old kerb is low, cold or leaking.
Neighbouring towns include Chester-le-Street (8 km) and Consett (9 km). We offer a survey date when we reply to your enquiry.
Options we can specify in Stanley
- Raised upstands for deep green or ballasted roofs
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Upstand repairs and rebuilds
- Proprietary insulated kerbs
- Internal plaster-box linings
- Membrane dressed up and sealed
- Matched to your roof covering
Things we check at survey
- Upstand size must match the unit within a tight tolerance
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
Consents for rooflight upstands & kerbs in Stanley
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.
Read the planning permission guide before you commit to a design.
Rooflight upstands & kerbs prices in Stanley
Prices below are shown including and excluding VAT. In Stanley, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
From enquiry to finished job
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Fixed quote. Product, work and price in writing — nothing is ordered until you agree.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Nearby towns
More we do in Stanley
Common questions
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
Will I need planning permission in Stanley?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge.
Do I need to be at home for the survey in Stanley?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
