How we approach rooflight upstands & kerbs in Stamford
For Stamford homes and buildings we offer rooflight upstands & kerbs: insulated kerbs built and waterproofed to suit your rooflight. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Industrial and commercial units around Midlands towns often still have their original rooflight sheets, which are due for replacement. In Stamford, as anywhere, rooflight upstands & kerbs are the usual choice for roofs where the old kerb is low, cold or leaking.
Stamford sits about 17 km from Oakham and 18 km from Uppingham, and we cover the whole PE9 postcode district and the roads in between.
Choices for your Stamford project
- Proprietary insulated kerbs
- Raised upstands for deep green or ballasted roofs
- Timber upstands with insulation
- Upstand repairs and rebuilds
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Built square to the rooflight size
- Insulated to avoid a cold bridge
Before you order: points to check
- Upstand size must match the unit within a tight tolerance
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
Consents for rooflight upstands & kerbs in Stamford
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Our planning guide covers each nation in more detail.
Rooflight upstands & kerbs prices in Stamford
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
What happens next
- Tell us what you have. Send the PE9 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Rooflight upstands & kerbs near Stamford
Related work in Stamford
Questions about rooflight upstands & kerbs in Stamford
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Does every rooflight need an upstand?
Flat and dome rooflights do. Pitched roof windows use flashing kits instead.
Can you work alongside my builder in Stamford?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
Do I need to be at home for the survey in Stamford?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
