Rooflight upstands & kerbs in Uppingham: what is involved?
We handle rooflight upstands & kerbs across Rutland, including Uppingham. In short: insulated kerbs built and waterproofed to suit your rooflight. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Bungalows are common across parts of the Midlands, and sun tunnels or roof windows are a quick way to brighten internal hallways. Typical uses for rooflight upstands & kerbs include new flat-roof openings and rooflight replacements.
Uppingham is around 9 km from Oakham, and we survey and fit throughout that part of Rutland, including the LE15 district.
Choices for your Uppingham project
- Timber upstands with insulation
- Internal plaster-box linings
- Raised upstands for deep green or ballasted roofs
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Proprietary insulated kerbs
- Membrane dressed up and sealed
- Fixings and falls agreed with the rooflight maker
What to check first
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
- Membrane compatibility with the rooflight's sealants
Planning, building control and Uppingham
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Our planning guide covers each nation in more detail.
Guide prices for Uppingham
Guide prices for rooflight upstands & kerbs in Uppingham are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
How the job runs
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Uppingham address.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Neighbouring towns
Other services in Uppingham
Rooflight upstands & kerbs in Uppingham: questions
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
Is the survey in Uppingham free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Will I need planning permission in Uppingham?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
