How we approach rooflight upstands & kerbs in Sutton in Ashfield
For Sutton in Ashfield homes and buildings we offer rooflight upstands & kerbs: insulated kerbs built and waterproofed to suit your rooflight. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Industrial and commercial units around Midlands towns often still have their original rooflight sheets, which are due for replacement. Typical uses for rooflight upstands & kerbs include roofs where the old kerb is low, cold or leaking.
Sutton in Ashfield is around 20 km from Nottingham, and we survey and fit throughout that part of Nottinghamshire, including the NG17 district.
Options we can specify in Sutton in Ashfield
- Upstand repairs and rebuilds
- Proprietary insulated kerbs
- Raised upstands for deep green or ballasted roofs
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Timber upstands with insulation
- Membrane dressed up and sealed
- Insulated to avoid a cold bridge
What to check first
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
- Insulation continuity around the upstand affects condensation
Planning, building control and Sutton in Ashfield
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Read the planning permission guide before you commit to a design.
Guide prices for Sutton in Ashfield
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
From enquiry to finished job
- Send the details. Postcode, rough size and a photo of the roof and room.
- Measure and check. A surveyor visits Sutton in Ashfield, measures and checks structure and access.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Nearby towns
Other services in Sutton in Ashfield
Common questions
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
What roof coverings do you work with?
Single-ply, EPDM, felt, GRP and liquid-applied systems — or we coordinate with your roofer.
How do I book a survey in Sutton in Ashfield?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
Will I need planning permission in Sutton in Ashfield?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge.
