What do rooflight upstands & kerbs in Aldridge involve?
Rooflight upstands & kerbs in Aldridge means insulated kerbs built and waterproofed to suit your rooflight. We cover the WS9 district and the rest of the West Midlands, with a survey before any price is fixed.
Older terraced streets in Midlands towns often have back additions and side passages that suit a ridge rooflight or long flat rooflight. Think of rooflight upstands & kerbs for new flat-roof openings and rooflight replacements.
From Aldridge to Walsall, Bloxwich and Sutton Coldfield, the same survey-first process applies: measure, specify, fix the price, then fit.
Specification options
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Timber upstands with insulation
- Raised upstands for deep green or ballasted roofs
- Proprietary insulated kerbs
- Internal plaster-box linings
- Fixings and falls agreed with the rooflight maker
- Matched to your roof covering
Things we check at survey
- Insulation continuity around the upstand affects condensation
- Membrane compatibility with the rooflight's sealants
Do you need permission in Aldridge?
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
Our planning guide covers each nation in more detail.
Guide prices for Aldridge
Guide prices for rooflight upstands & kerbs in Aldridge are the same as anywhere we work — what changes the price is the job: access, structure, scaffold and finishing.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
From enquiry to finished job
- Send the details. Postcode, rough size and a photo of the roof and room.
- Measure and check. A surveyor visits Aldridge, measures and checks structure and access.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
Related work in Aldridge
Rooflight upstands & kerbs in Aldridge: questions
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
Why is my rooflight cold around the edge?
Usually an uninsulated upstand. Insulating the kerb and lining the reveal fixes most cold spots.
Is the survey in Aldridge free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Will I need planning permission in Aldridge?
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof.
