Rooflight upstands & kerbs in Tipton: what is involved?
Our rooflight upstands & kerbs service in Tipton covers insulated kerbs built and waterproofed to suit your rooflight. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Midlands housing is a mix of Victorian terraces, inter-war semis and newer estates, and rear kitchen extensions with flat rooflights are a common upgrade. Think of rooflight upstands & kerbs for roofs where the old kerb is low, cold or leaking.
Tipton is around 13 km from Birmingham, and we survey and fit throughout that part of the West Midlands, including the DY4 district.
Choices for your Tipton project
- Raised upstands for deep green or ballasted roofs
- Upstand repairs and rebuilds
- Upstands to suit single-ply, felt, GRP or liquid roofs
- Internal plaster-box linings
- Proprietary insulated kerbs
- Correct height above the finished roof
- Fixings and falls agreed with the rooflight maker
What to check first
- Upstand size must match the unit within a tight tolerance
- Minimum upstand height is set by the rooflight manufacturer — commonly 150 mm above the finished roof
Planning and building rules for Tipton
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Our planning guide covers each nation in more detail.
Guide prices for Tipton
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or raised upstand | £715 – £1,195 | £595 – £995 |
| Standard insulated upstand Typical | £475 – £715 | £395 – £595 |
| Small upstand on new roof | £355 – £475 | £295 – £395 |
From enquiry to finished job
- Tell us what you have. Send the DY4 postcode, a rough size and a couple of photos.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Nearby towns
Other services in Tipton
Common questions
Can an old upstand be reused?
If it is sound, square, insulated and the right size. Often it is cheaper to rebuild than adapt.
Can I build the upstand myself?
Your builder can, to our drawing. We check it before the rooflight is fitted, because the unit must sit square and level.
How high should a rooflight upstand be?
High enough to meet the rooflight manufacturer's minimum above the finished roof surface — commonly 150 mm. On roofs with deep finishes, such as green roofs, it needs to be taller.
Can you work alongside my builder in Tipton?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
How do I book a survey in Tipton?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
