How we approach skylight blinds & solar control in Hyde
For Hyde homes and buildings we offer skylight blinds & solar control: electric blinds, blackout and solar-control upgrades for rooflights. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Rear kitchen extensions on North West semis often have small domes from decades ago that leak or have yellowed. In Hyde, as anywhere, skylight blinds & solar control are the usual choice for bedrooms, nurseries and south-facing kitchens.
Hyde is around 11 km from Manchester, and we survey and fit throughout that part of Greater Manchester, including the SK14 district.
What you can choose
- Insect screens on opening units
- Solar-powered remote blinds
- Integral blinds within the glass
- Solar-control glass replacement
- Electric pleated or roller blinds
- Electric or solar-powered operation
- Integral blinds never need dusting
Before you order: points to check
- Electric blinds need a power supply or solar panel
- Retrofit blinds depend on reveal depth and access
Planning and building rules for Hyde
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
Guide prices for Hyde
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Integral blind in a new glass unit | £715 – £1,435 | £595 – £1,195 |
| Electric or solar blind Typical | £595 – £1,075 | £495 – £895 |
| Manual pleated or blackout blind | £355 – £595 | £295 – £495 |
How the job runs
- Tell us what you have. Send the SK14 postcode, a rough size and a couple of photos.
- Measure and check. A surveyor visits Hyde, measures and checks structure and access.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Nearby towns
More we do in Hyde
Common questions
Can I get full blackout?
Blackout fabrics in side channels give near-total darkness.
Can you fit a blind to my existing rooflight?
Usually, yes — if there is enough depth in the reveal for the cassette and rails. We measure first.
What is an integral blind?
A blind sealed between the panes of the glass unit. It never gets dusty or damaged, but is ordered with the unit.
Is the survey in Hyde free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Do I need to be at home for the survey in Hyde?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
