Skylight installation for Bedford: the essentials
Our skylight installation service in Bedford covers survey, supply and fit — new openings, extensions and fit-only work. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Across the South East, single-storey kitchen extensions on 1930s semis and post-war detached houses are where most flat rooflights and lanterns go. Skylight installation suits builders' projects and retrofits into finished roofs.
From Bedford to Sandy, Ampthill and Flitwick, the same survey-first process applies: measure, specify, fix the price, then fit.
Specification options
- Electrics coordination
- Upstands and flashings
- New openings with joist trimming
- Fit only (customer-supplied units)
- Internal plaster reveal
- Fitting for builders on new extensions
- Fit-only for units you have bought
Things we check at survey
- Structural changes may need an engineer's check
- Fit-only work relies on the product being suitable and complete
Do you need permission in Bedford?
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
What does skylight installation cost in Bedford?
These are typical supply-and-fit ranges. For an address in Bedford, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| New opening in an existing roof, supply and fit | £2,395 – £5,395 | £1,995 – £4,495 |
| Supply and fit into a new extension Typical | £1,435 – £3,595 | £1,195 – £2,995 |
| Fit only, customer-supplied unit | £595 – £1,195 | £495 – £995 |
From enquiry to finished job
- Send the details. Postcode, rough size and a photo of the roof and room.
- Survey. We measure the opening, check the roof build-up and agree the options.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Fitting and handover. We install, clean down and leave product and warranty documents.
Neighbouring towns
Other services in Bedford
Skylight installation in Bedford: questions
Do you work with builders?
Yes — on new extensions we fit to the builder's programme once the upstand or roof is ready.
Do you fit rooflights bought elsewhere?
Yes. We check the product and the opening first, and our workmanship terms cover the fitting rather than the product.
Is the survey free?
Yes, for new installations. Repair visits are charged.
How do I book a survey in Bedford?
Send your postcode and, if you can, a photo of the roof and the room. We offer a survey date when we reply.
Will I need planning permission in Bedford?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
