What does skylight installation involve?
Our skylight installation service in Hertfordshire covers survey, supply and fit — new openings, extensions and fit-only work. We survey every job before fixing the price.
Period cottages and conservation-area streets are common in the South East, so slim conservation rooflights are often the right choice. Larger gardens in much of the South East mean deeper rear extensions, and deeper rooms need light from above rather than only from the doors.
Towns in Hertfordshire
Options we can specify
- Electrics coordination
- New openings with joist trimming
- Fit only (customer-supplied units)
- Internal plaster reveal
- Upstands and flashings
- New openings in existing roofs
- Fixed price in writing before work
Planning and building rules in England
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
Skylight installation prices in Hertfordshire
These are typical supply-and-fit ranges. For an address in Hertfordshire, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| New opening in an existing roof, supply and fit | £2,395 – £5,395 | £1,995 – £4,495 |
| Supply and fit into a new extension Typical | £1,435 – £3,595 | £1,195 – £2,995 |
| Fit only, customer-supplied unit | £595 – £1,195 | £495 – £995 |
How the job runs
- Tell us about the roof. Send the postcode, rough sizes and a photo or two through the form, WhatsApp or the guide-price tool.
- Free survey. For new installations a surveyor measures the opening, checks the roof build-up and talks through glass and options.
- Fixed written quote. You get the product, the work and the price in writing. Nothing is ordered or paid for until you agree.
- Fitting and handover. We fit, seal and make good, then hand over product data, warranties and any certificate paperwork.
Installation in nearby areas
Common questions
Do I need a structural engineer?
For new openings that cut joists or rafters, a structural check is sensible and building control may ask for calculations.
Who handles building control?
We tell you which route applies — building control approval, a building warrant in Scotland, or in England and Wales self-certification by a registered competent person — and supply the product data.
Is the survey free?
Yes, for new installations. Repair visits are charged.
How long does installation take?
Fitting into a prepared upstand takes about a day. A new opening in an existing roof, including making good, often takes two to three days.
Do I need to be at home for the survey in Hertfordshire?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
