Sliding rooflights for Hyde: the essentials
Our sliding rooflights service in Hyde covers box rooflights whose glass lid slides back for walk-out roof access. Every job starts with a survey of the opening, the roof covering and the room below, and a fixed written price.
Rear kitchen extensions on North West semis often have small domes from decades ago that leak or have yellowed. In Hyde, as anywhere, sliding rooflights are the usual choice for staircases that rise to a roof terrace.
Hyde sits about 3 km from Denton and 3 km from Dukinfield, and we cover the whole SK14 postcode district and the roads in between.
Choices for your Hyde project
- Double or triple glazing
- Integrated balustrade on some ranges
- Rain sensor
- Electric drive with safety edge
- Box (glazed sides) or flat sliding lid
- Daylight down the stair when closed
- Lockable from inside
Things we check at survey
- Weight and point loads need a structural check
- The stair opening and headroom must meet Building Regulations
Planning and building rules for Hyde
In England a rooflight on a house is usually permitted development under Class C if it projects no more than 150 mm beyond the roof slope and sits no higher than the ridge. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.
Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. Replacing a rooflight or roof window can be self-certified by an installer registered with an authorised competent person scheme; otherwise building control approval is needed.
See our building regulations guide for U-values, glazing limits and self-certification.
Sliding rooflights prices in Hyde
Prices below are shown including and excluding VAT. In Hyde, as elsewhere, making good inside and access equipment are the main variables.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large box slider with electric drive | £11,995 – £20,395 | £9,995 – £16,995 |
| Standard box slider Typical | £8,995 – £13,195 | £7,495 – £10,995 |
| Flat sliding lid | £7,195 – £9,595 | £5,995 – £7,995 |
What happens next
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Hyde address.
- Measure and check. A surveyor visits Hyde, measures and checks structure and access.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Neighbouring towns
Related work in Hyde
Common questions
Does it need planning permission?
A box unit that projects above the roof plane can need planning permission, especially on the front of a house or in a conservation area. We check before you order.
Can children open it?
Controls can be key-switched or placed out of reach. We will set the controls up to suit the household.
Is a sliding rooflight better than an access hatch?
For daily use, usually yes — you walk out under open sky instead of climbing through a hinged hatch. A hatch costs less and suits occasional access.
Is the survey in Hyde free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Can you work alongside my builder in Hyde?
Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.
