Bespoke & shaped rooflights in Long Eaton: what is involved?
We handle bespoke & shaped rooflights across Derbyshire, including Long Eaton. In short: triangular, angled, curved and multi-pane rooflights made to measure. The survey checks structure, weathering and orientation, so the quote reflects your actual roof.
Midlands housing is a mix of Victorian terraces, inter-war semis and newer estates, and rear kitchen extensions with flat rooflights are a common upgrade. In Long Eaton, as anywhere, bespoke & shaped rooflights are the usual choice for angled ceilings, corners and architect-designed extensions.
Jobs in Long Eaton are planned around access: whether the roof can be reached from the garden, whether a hoist or crane is needed, and where we can park. We check this when we measure.
What you can choose
- Solar-control and low-iron glass
- Sloped or monopitch rooflights
- Triangular and trapezoid panes
- Multi-pane butt-jointed runs
- Corner and wrap-around glazing
- Corner, slope and multi-pane runs
- Works with architects and builders
Things we check at survey
- Structural support must be designed in
- Large panes need a lifting plan
Planning, building control and Long Eaton
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
For English homes the energy rules ask for rooflights of 2.2 W/m²K or better and roof windows of 1.4 W/m²K (or WER Band B); most modern double glazed units meet both. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
Bespoke & shaped rooflights prices in Long Eaton
The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Multi-pane or corner run | £9,595 – £17,995 | £7,995 – £14,995 |
| Single shaped pane, large Typical | £5,395 – £9,595 | £4,495 – £7,995 |
| Single shaped pane, small | £4,195 – £5,395 | £3,495 – £4,495 |
From enquiry to finished job
- Tell us what you have. Send the NG10 postcode, a rough size and a couple of photos.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Agree the quote. You approve the specification and price before anything is ordered.
- Fit and make good. We fit, seal, test and finish the reveal, then hand over the paperwork.
Nearby towns
More we do in Long Eaton
Questions about bespoke & shaped rooflights in Long Eaton
Can bespoke units open?
Some can. Shaped glass is usually fixed, combined with a standard opening unit elsewhere.
Why does bespoke take longer?
Each unit is drawn, checked and manufactured to order.
Can any shape be made?
Most straight-edged shapes can be made in glass, within the manufacturer's size and angle limits. Curved glass is possible but specialist.
Is the survey in Long Eaton free?
Yes for new installations. Repair visits are charged, and we tell you the price before we book.
Do you offer bespoke & shaped rooflights in Long Eaton?
Yes. We carry out bespoke & shaped rooflights in Long Eaton and across Derbyshire. Send your postcode and we will offer a survey date when we reply.
