What do flat rooflights in Maidenhead involve?
For Maidenhead homes and buildings we offer flat rooflights: fixed double or triple glazed rooflights for flat roofs and extensions. We measure first, specify to the opening and confirm any planning or building-control points before quoting.
Period cottages and conservation-area streets are common in the South East, so slim conservation rooflights are often the right choice. Typical uses for flat rooflights include kitchen extensions, side returns and flat-roofed back rooms.
Jobs in Maidenhead are planned around access: whether the roof can be reached from the garden, whether a hoist or crane is needed, and where we can park. We check this when we measure.
What you can choose
- Insulated kerb or timber upstand built to suit
- Rain sensor if paired with an opening unit
- Plastered or lined internal reveal
- Frame colours: anthracite, black, white or RAL
- Integral or fitted blinds
- Inner pane laminated for safety overhead
- Double or triple glazed with a warm-edge spacer
What to check first
- New openings in an existing roof need a structural check on joists
- Needs a properly formed upstand — usually at least 150 mm above the finished roof surface (check the manufacturer's figure)
Planning, building control and Maidenhead
English householder permitted development (Class C) normally covers rooflights that stand no more than 0.15 m proud of the roof plane and stay below the highest part of the roof. Listed buildings need listed building consent, flats have no householder permitted development rights, and an Article 4 direction can remove the rights in some conservation areas.
Under Approved Document L, a rooflight added to an English home must achieve at least 2.2 W/m²K (horizontal plane), and a roof window 1.4 W/m²K or Window Energy Rating Band B. In an extension, glazing including rooflights is normally limited to 25% of the new floor area plus any windows or doors the extension covers, unless a whole-house calculation shows otherwise.
See our building regulations guide for U-values, glazing limits and self-certification.
Flat rooflights prices in Maidenhead
These are typical supply-and-fit ranges. For an address in Maidenhead, scaffold, a hoist for heavy glass, or a new structural opening can move the figure, which is why we survey first.
| Option | Guide price inc VAT | Ex VAT |
|---|---|---|
| Large or triple glazed (1500 × 2500 mm and up) | £2,395 – £4,195 | £1,995 – £3,495 |
| Mid-size double glazed (1000 × 2000 mm) Typical | £1,675 – £2,395 | £1,395 – £1,995 |
| Small double glazed (up to 1000 × 1000 mm) | £1,195 – £1,795 | £995 – £1,495 |
From enquiry to finished job
- Get in touch. Use the form, WhatsApp or the guide-price tool with your Maidenhead address.
- Free site visit. For new installs we survey free, measure and confirm the roof detail.
- Written price. You receive a fixed price listing the unit, the work and the lead time.
- Installation day. Usually one day into a prepared opening, longer for new openings.
Nearby towns
More we do in Maidenhead
Questions about flat rooflights in Maidenhead
Can a flat rooflight be walked on?
Not unless it is designed as a walk-on unit with structural laminated glass. A standard flat rooflight is for light only — if the roof is used as a terrace, choose a walk-on rooflight instead.
How long does it take?
Fitting into a prepared upstand usually takes a day. Forming a new opening in an existing roof, including making good inside, is often two to three days.
Do flat rooflights leak?
A well-fitted flat rooflight should not leak. Leaks almost always come from the upstand or membrane detailing, not the glass unit, which is why the upstand height and the way the roof covering is dressed up and under the frame matter more than the brand.
Do I need to be at home for the survey in Maidenhead?
Yes — someone needs to let us into the room below and, where possible, show us how the roof is reached.
Will I need planning permission in Maidenhead?
Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line.
