Free survey for new installsFixed written quoteEngland, Wales, Scotland & NI
Call 0800 088 6248
SkylightCompany.uk
Flat rooflights · Derbyshire

Flat rooflights in Ilkeston

Flat rooflights in Ilkeston (DE7) and across Derbyshire: surveyed, specified to the opening and priced in writing before any work starts.

  • Planning and building-regs points explained
  • Upstand, flashing and making good set out in your quote
  • Free survey for new installations

Quote for Ilkeston

Free survey for new installs · we aim to reply within one working day

Enter a UK postcode.
Choose an option.
Enter your name.
Enter a phone number we can call.
Check the email address.

We use your details to answer this enquiry and arrange your survey. They pass through our form, chat and hosting providers and are shared only with the surveyor or installer working for us on your job — see our privacy notice.

DE7Postcode district
DerbyshireCounty / region
6 kmto Heanor
£1,195Guide price from (inc VAT)

How we approach flat rooflights in Ilkeston

Thinking about flat rooflights in Ilkeston? The short answer: fixed double or triple glazed rooflights for flat roofs and extensions. The longer answer depends on your roof, which is why we survey before we price.

Bungalows are common across parts of the Midlands, and sun tunnels or roof windows are a quick way to brighten internal hallways. Typical uses for flat rooflights include landings, bathrooms and rear extensions with flat roofs.

Ilkeston is around 12 km from Derby, and we survey and fit throughout that part of Derbyshire, including the DE7 district.

Choices for your Ilkeston project

  • Solar-control or self-cleaning outer pane
  • Square, rectangular or long-format sizes
  • Double or triple glazing
  • Integral or fitted blinds
  • Frame colours: anthracite, black, white or RAL
  • Slim sightlines from inside — mostly glass, little frame
  • Pairs with an opening unit where you also need ventilation

Things we check at survey

  • Needs a properly formed upstand — usually at least 150 mm above the finished roof surface (check the manufacturer's figure)
  • The roof membrane must be dressed up the upstand before the unit goes on

Planning, building control and Ilkeston

Most rooflights on English houses do not need planning permission, provided they keep within 150 mm of the roof surface and below the ridge line. A rooflight on a side-facing slope must be obscure-glazed, and fixed shut unless the opening part is more than 1.7 m above the floor.

Building Regulations Approved Document L sets a limiting U-value of 2.2 W/m²K for new or replacement rooflights in existing homes, measured in the horizontal plane; roof windows need 1.4 W/m²K or a Band B energy rating. The Future Homes and Buildings Standards, published in March 2026, apply from 24 March 2027 and keep the 2.2 W/m²K limit for rooflights.

Our planning guide covers each nation in more detail.

Guide prices for Ilkeston

The ranges below are typical for straightforward jobs; your fixed price follows a survey of your roof.

OptionGuide price inc VATEx VAT
Large or triple glazed (1500 × 2500 mm and up)£2,395 – £4,195£1,995 – £3,495
Mid-size double glazed (1000 × 2000 mm) Typical£1,675 – £2,395£1,395 – £1,995
Small double glazed (up to 1000 × 1000 mm)£1,195 – £1,795£995 – £1,495

The process, step by step

  1. Tell us what you have. Send the DE7 postcode, a rough size and a couple of photos.
  2. Survey. We measure the opening, check the roof build-up and agree the options.
  3. Agree the quote. You approve the specification and price before anything is ordered.
  4. Fitting and handover. We install, clean down and leave product and warranty documents.

Nearby towns

Other services in Ilkeston

Common questions

Can you fit into my existing flat roof?

Yes. We form a new opening, trim the joists, build and waterproof an upstand and make good the ceiling. A survey confirms the joist direction and roof build-up first.

Double or triple glazing?

Double glazing suits most domestic jobs. Triple glazing improves thermal performance and cuts noise from rain, which is worth it over bedrooms or where the energy calculation is tight.

How long does it take?

Fitting into a prepared upstand usually takes a day. Forming a new opening in an existing roof, including making good inside, is often two to three days.

Can you work alongside my builder in Ilkeston?

Yes. On new extensions we fit once the opening and upstand are ready and coordinate dates with your builder.

Do you fit flat rooflights in Ilkeston?

Yes. We survey and fit flat rooflights in Ilkeston and across Derbyshire. Send your postcode and we will offer a survey date when we reply.

Free survey · fixed written quote

Plan the light before you build

Fixed written quotes after a free survey for new installations.

CallFree quote